Page 1 of 1
having a sowftware limitations in setting the tower to tower axis length
Posted: 16 Jan 2026, 02:57
by taha981226
hello i m having an issue that i cannot set my machine more than 1500mm tower to tower thus i m limited to 1.5m of foam cutting and my machine is 1.7m (1700mm) and i have some project deadlines and i cant get the cutting accuracy i want as the axis are not set up as they should thus resulting in wrong projection and movement i tired saving the file and changing the machine parameters in text file and importing it but it rest and over write to 1500mm
looking forward for a solution thank you
"
Re: having a sowftware limitations in setting the tower to tower axis length
Posted: 16 Jan 2026, 19:00
by Gemini
Hello,
I wouldn't have thought it possible to cut such long wings in one piece and with reasonable precision, that's why Gemini Aero Foam has a CNC size limit.
This issue solved on release 1.0.1.1b, in line just now.
Re: having a sowftware limitations in setting the tower to tower axis length
Posted: 16 Jan 2026, 20:04
by taha981226
thanks for the fast reply <3
Re: having a sowftware limitations in setting the tower to tower axis length
Posted: 16 Jan 2026, 20:46
by Gemini
Please wait a moment, I've forgottent some value limitations.
The corrections are done, and I'm recompiling the sofware, it will be online in one hour.
Re: having a sowftware limitations in setting the tower to tower axis length
Posted: 16 Jan 2026, 21:17
by Gemini
Done.